Material Compliance & Test Reports

What Is On File, And What It Covers

The silicone compound we mould is supported by eleven third-party SGS test reports, all Pass. Between them they cover restricted substances, environmental compliance and food-contact suitability. The table below is the actual evidence, with the report number for each test so you can ask us for the document that matters to your project.

Restricted Substances and Environmental Compliance

• EU RoHS (EU) 2015/863 - all ten restricted substances (lead, mercury, cadmium, hexavalent chromium, PBB, PBDE and the four phthalates DEHP, BBP, DBP, DIBP) not detected. Tested to the IEC 62321 series.
• REACH SVHC - Candidate List screening plus potential SVHC screening, none at or above 0.1% w/w.
• Phthalates - seventeen phthalates to EN 14372, all not detected.
• PAHs - eighteen parameters to AfPS GS 2019:01 PAK, all not detected at 0.1 mg/kg.
• Halogen - fluorine, chlorine, bromine and iodine to EN 14582, all not detected.

For a buyer who has to evidence environmental compliance in an audit, this is the set of documents that answers the question - and it is the reason we lead material discussions with compliance rather than with a price.

Food-Contact Suitability

• US FDA 21 CFR 177.2600 - total extractives, Pass.
• LFGB Section 30 and 31 with BfR recommendation - sensorial examination (odour and taste), Pass; bisphenols including BPA, BPF, BPS and BPAF, all not detected.
• GB 4806.16-2025 - sensory requirement, overall migration, consumption of potassium permanganate, heavy metal as Pb and volatile substance (0.11 g/100 g measured against a 0.5 g/100 g limit), all Pass.

These are the standards behind food-contact silicone. If your product touches food, drinking water or skin, tell us at enquiry stage and we will match the grade to the requirement and send the reports that apply.

The One Caveat You Should Hold Us To

The reports cover the compound. Compliance of a finished part depends on the grade, the colour or pigment, and the process it goes through. We will not tell you that a part "is certified" - we will tell you which compound grade is supported by which report, and match the grade to your requirement at quotation stage. If a colour or a secondary process changes the picture, we say so before you commit.

What This Page Deliberately Does Not Claim

• No "FDA approved", "medical grade" or "certified food grade" label. Those phrases imply an approval of a product, which we do not hold and will not imply.
• No medical device, implant or pharmaceutical positioning.
• No ingress-protection (IP) rating. Ingress performance is a design outcome of your enclosure, not a material certificate we can issue.
• No performance or life-cycle figure. Those come from testing your part, and the customers we work with have not released theirs.
• No customer name or logo. Our position in the supply chain is described anonymously.

How To Use This In Your Project

Send us the requirement - the environment, the contact media, and any standard your customer or your market requires - and we will return the compound grade and the report numbers that cover it, as part of the quotation rather than as a separate request.